5
5.0
Mar 20, 2021
03/21
by
(AETEL)
data
eye 5
favorite 0
comment 0
This is the Greg's wade extruder which .scad file was found at http://www.thingiverse.com/thing:65939 . It was modified for Buddaschnozzle and to fix in X carriage with the holes separated 24mm.
Topics: prusa_i3, 24_mm, thingiverse, 3D Printer Extruders, Gregs_Wade_Extruder, stl
9
9.0
Apr 7, 2021
04/21
by
(AlexNZ)
data
eye 9
favorite 0
comment 0
When i tired to use Allen wrench every time i need to change filament or fix filament-jam, i decided to do this little helper, so i could easy screw\unscrew bolts with my bare hands. Fits to any M3 bolt. Useful for those who have Greg's Wade (http://www.thingiverse.com/thing:17030) and remixes like (http://www.thingiverse.com/thing:188244) - that's me, on my Vision+ printer ))
Topics: Vision, bolt_cap, bolt, extruder, tensioner, stl, allen, thingiverse, Wade, 3D Printer Accessories,...
10
10.0
Apr 5, 2021
04/21
by
(Amplivibe)
data
eye 10
favorite 0
comment 0
The hexagon in the big gear was about a mm too big and the source didn't allow me to recreate the gear. So I loaded the model in OpenSCAD and "patched" it. Diameter was about 16mm and is now 15mm. Perfect for my hobbed bolt!
Topics: thingiverse, mendel, wade, stl, printer, 3D Printer Extruders
9
9.0
Jan 16, 2021
01/21
by
(Cisco_)
data
eye 9
favorite 0
comment 0
Revision1 - Sep. 25, 2017: Update Idle (it was wrong); Upload funky big gear; loaded new 3d views. This is a remix from Nophead's mendel90 wades extruder. (Made for E3D v6) with Prusa i3 MK2 Multi Material Y- Piece Simple idea to convert your printer into a duo material. This Hybrid model combines a Directdrive for the everyday print (maybe flexibles) and a Bowden extruder for the second material. Both gears are exactly the same as original NopeHead's design Use 4mm O.D. tubing to create the...
Topics: extruder, multimaterial, 3D Printer Extruders, dual_extruder, stl, E3D, E3D_v6, thingiverse,...
11
11
Apr 4, 2021
04/21
by
(Culain)
data
eye 11
favorite 0
comment 0
sorry for the german part names klein = small gross = large usable with the wade extruder. large gear: teeth: 39 hole and hexagon made for M8 hexagon head bolt small gear teeth: 11 hole: 5mm (for NEMA17 engine) axial hole 2.5mm for M3 thread. (Don't know if this works well. Haven't test it yet) axial distance: 40mm Still work in progress :3 Software used: Inventor 2012 Professional (Skeinforge44, Sprinter Firmware and Pronterface Host)
Topics: thingiverse, mendel, Wade, model, reprap, useful, featured, supportless, prusa, stl, gears, Other,...
9
9.0
Apr 7, 2021
04/21
by
(DanMoto)
data
eye 9
favorite 0
comment 0
Groove mount plate for E3D hotend on a mendel90 carriage. It may fit other carriages as well.
Topics: plate, e3d, 3D Printer Parts, extruder, hotend, wade, stl, groove, mendel, mount, thingiverse,...
5
5.0
Jun 6, 2021
06/21
by
(Dazed_dnc)
data
eye 5
favorite 0
comment 0
Some people get away without using springs on wade's geared extruder (http://www.thingiverse.com/thing:1794), but I felt that this was too sensitive to being over/under tightened. I wasn't able to find appropriately sized springs at the local hardware store either. I did cut some longer springs down to size, but I also made these. At least in the short term, they seem to work about as well as actual springs. The biggest difference is that they don't have as much travel. In my opinion, that...
Topics: extruder, upgrade, reprap, mendel, Other, thingiverse, wade, stl, spring
5
5.0
Apr 12, 2021
04/21
by
(Dippyskoodlez)
data
eye 5
favorite 0
comment 0
This is a rail mounting, extruder carriage for converting the Makerfarm i3v to a modular i3 Rework style carrier. Scaling is a bit funny when I import it to Simplify, scale up by 10.1 for proper dimensions and rotate for printability. 2/5/2015 - Completed.
Topics: thingiverse, makerfarm_i3v, prusa_i3_rework, stl, Gregs_Wade_Extruder, 3D Printer Parts,...
9
9.0
Apr 1, 2021
04/21
by
(Domonoky)
data
eye 9
favorite 0
comment 0
This the same model as http://www.thingiverse.com/thing:3015 but its mirrored. You need this for the 2 head mendel x-carriage. All other parts are unmodified, take them from the original Wades extruder. You can find more info about it here: http://ifeelbeta.de/index.php/mendel-x-carriage-for-two-extruders
Topics: toolhead, NEMA17, stepper, thingiverse, upgrade, reprap, NEMA, Geared Extruder, 3D, extruder,...
4
4.0
Apr 13, 2021
04/21
by
(FDMTech)
data
eye 4
favorite 0
comment 0
Update: V3 is available here http://www.thingiverse.com/thing:763041 Korri on thingiverse made this. I completely re-did it in 123D so that it can mount lower and fits a i3 Rework E3D Extruder: http://www.thingiverse.com/thing:257811 http://www.thingiverse.com/thing:415175 (1.75mm) I used a LJ12A3-4-Z/BX sensor with this thing. The previous mount from Korri wasn't low enough to hold it and have it sense the build plate.
Topics: thingiverse, prusa_i3_rework, wade, inductive, mount, stl, sensor_mount, prusa_i3,...
1,012
1.0K
Jan 19, 2010
01/10
by
(FRB) FrontRangeBouldering.com
audio
eye 1,012
favorite 0
comment 1
mb happened to run into Jamie Emerson at a health food store in Boulder, Colorado. Jamie Emerson is a route setter at Movement Climbing & Fitness and owns b3bouldering.com. Jamie also is in the process of authoring a bouldering guide to Rocky Mountain National Park in Estes Park, Colorado. INTERVIEWEE: Jamie Emerson LOCATION: Jamie's apartment, Boulder, Colorado DATE: 1-15-2010 INTERVIEWER: Mike Brooks LENGTH: 10.19 minutes SIZE: 9.45 MB mp3 Notes: ALBUM: FRB Interviews - climbing stars...
favoritefavoritefavorite ( 1 reviews )
Topics: FRB Interviews - climbing stars, RMNP bouldering, Jamie Emerson, movement climbing and fitness,...
42
42
Jan 3, 2011
01/11
by
(FRB) FrontRangeBouldering.com
audio
eye 42
favorite 0
comment 0
Jackie Hueftle. 10/24/2005. Jackie talks about her early days climbing around the Reno area and teaching climbing. Jackie goes on to talk about the Mammut SendFest in Salt Lake City, Utah INTERVIEWEE: Jackie Hueftle DATE: 10/24/2005 LOCATION: Spot Bouldering Gym, Boulder, CO INTERVIEWER: Mike Brooks LENGTH: 8.39 minutes SIZE: 4.0 MB mp3 Notes: ALBUM: FRB Interviews - Boulder Life Style CONTACT: info@frontrangebouldering.com copyright © (FRB) FrontRangeBouldering.com
Topics: FRB Interviews - Boulder Life Style, Jackie Hueftle, 16 years old, Reno, Nevada, Donner's Pass,...
11
11
Apr 5, 2021
04/21
by
(JimDConnolly)
data
eye 11
favorite 0
comment 0
This is a converter plate to allow a bolt on upgrade for the Mendel, Should allow a Wade/J Head subassembly to be mounted directly to the existing x-carriage. Requires removal of original x-carriage front plate. Not tested yet but the weight of the motor should be approx over the centre.
Topics: thingiverse, Wade, 3D Printer Parts, J_Head, X_carriage, Vertical, Mendel, stl
10
10.0
Mar 19, 2021
03/21
by
(JimDConnolly)
data
eye 10
favorite 0
comment 0
WIP
Topics: RepRapPro, Bowden, Mendel, thingiverse, 3D Printer Parts, Wade, stl
8
8.0
Jan 16, 2021
01/21
by
(JonnyBrylcreem)
data
eye 8
favorite 0
comment 0
This is a remix of my other extruder https://www.thingiverse.com/thing:1758044 I've tweaked the design slightly and made a mount to fit on a 20/20 extrusion using M4 bolts. All hardware is as per a standard Wade's Geared Extruder and detailed on my other listing. http://reprap.org/wiki/Wade%27s_Geared_Extruder#Non-Printed_Parts UPDATE: I've now included a stl called "Support 20 20 Inserts". It is designed to take M3x4x4 brass inserts such as...
Topics: Wades_extruder, Gregs_Wade_Extruder, thingiverse, 2020_extrusion, 2020_mount, Gregs_extruder, 3D...
10
10.0
Jun 8, 2021
06/21
by
(Jooxoe3i)
data
eye 10
favorite 0
comment 0
extruder body (for the einstein Prusa i3) that is fitted with Lego-technic compatible mounting holes. Think Attachments: - Minifigs :-) - other Lego blocks - fans - cameras - you name it other features: - intended for hotends with a mounting-plate - well known guidler from gregs wade extruder - easy replacement of hobbed bolt (no need to unscrew the hole bolt) - uses M4x60 screws
Topics: extruder, supportless, guidler, prusa_i3, thingiverse, wade, stl, quick, 3D Printer Extruders, lego
9
9.0
Jun 6, 2021
06/21
by
(Jooxoe3i)
data
eye 9
favorite 0
comment 0
a cleaned up mesh for the teeth, useable for customized/decorated gears
Topics: extruder, Gear, 47T, Wade, thingiverse, stl, Herringbone, 3D Printer Extruders
7
7.0
Jun 9, 2021
06/21
by
(Jooxoe3i)
data
eye 7
favorite 0
comment 0
adapter piece to mount a pneumatic push-fit coupling (sold with a 3mm e3d hotend) to a greg's wade style extruder block - replacing the actual hotend and it's groove-mount-plate
Topics: gregs_wade, bowden, 3D Printer Parts, thingiverse, e3d, stl
12
12
Apr 5, 2021
04/21
by
(M_Sanna)
data
eye 12
favorite 0
comment 0
This thing avoids dripping grease on the heatbed when you have greased the gear.
Topics: thingiverse, Wade, Bin, protect, heatbed, stl, Grease, Extruder, 3D Printer Extruders
11
11
Apr 16, 2021
04/21
by
(Magic-Goat)
data
eye 11
favorite 0
comment 0
Once I get to the bottom of a roll of filament i can't print for more than an hour without it jamming as the end of the roll has a tight coil on the filament and this kept causing the extruder to jam. So i designed this quick fix. It makes sure that the filament going into the extruder is nice and strait. Since I've had this on I've not had a single print jam! I'm using a Robo3D printer, as far as i know the Greg's wade on there is the same as any other but let me know if I'm wrong.
Topics: robo3d_upgrade, Gregs_Wade_Extruder, 3D Printer Parts, thingiverse, stl, robo3d
4
4.0
Apr 12, 2021
04/21
by
(Mak-a-face)
data
eye 4
favorite 0
comment 0
Prusa i3 Rework Jhead Compact Extruder for 1.75mm and 3mm filaments. Designs based on the Wade Extruder but much smaller. This Compact design came with new problems because of the shorten of the Jhead hotend. One that was very noticeable was the x-carriage distance to the glass, only 9 mm. Resulting in x-carriage catching the bulldog clips on the back and front of the heated bed when printing long prints. Solution: smaller clips on the sides. Another problem was that the Z-Axis Endstop needed...
Topics: thingiverse, fan_shroud, jhead, prusa_i3_rework, wade, 3D Printer Extruders, greg, J-head, stl,...
9
9.0
Apr 7, 2021
04/21
by
(Mak-a-face)
data
eye 9
favorite 0
comment 0
For use with Prusa i3 Rework X-Carriage. The inspiration came from [ch1t0's i3 extruder design](http://www.thingiverse.com/thing:76660). I initially began designing this extruder to work with the [E3D Hotend](http://e3d-online.com) because of the sloppy fit on the original version but the one thing I really wanted, was to install 60mm cooling fans. In addition I design a E3D 40mm shroud that works with v4, v5., plus a Dual 50mm Cooling fan holder and a 60mm Cooling Fan Holder. 2 different...
Topics: e3d, Prusa_i3, v5, 3D Printer Extruders, E3D_v6, extruder, greg, v4, wade, stl, i3_rework, rework,...
4
4.0
Apr 12, 2021
04/21
by
(Mak-a-face)
data
eye 4
favorite 0
comment 0
Prusa i3 Rework E3D v5 Compact Extruder for 1.75mm and 3mm filaments. Designs based on the Wade Extruder but much smaller. Remixed of the [Jhead Compact Extruder](http://www.thingiverse.com/thing:715496) & [E3D v6 Compact Extruder.](http://www.thingiverse.com/thing:725082) Check remixed for Instructions. Other Printed Parts: [Open hardware 40mm Fan Cover](http://www.thingiverse.com/thing:198400) [schlem's Skulltruder Gears](http://www.thingiverse.com/thing:49220)
Topics: thingiverse, e3dv5, wade, E3D, 3D Printer Extruders, greg, E3D_V5, stl, rework, i3_rework,...
4
4.0
Apr 12, 2021
04/21
by
(Mak-a-face)
data
eye 4
favorite 0
comment 0
Prusa i3 Rework E3D v6 Compact Extruder for 1.75mm and 3mm filaments. Designs based on the Wade Extruder but much smaller. Remixed of the [i3 Rework Jhead Compact version](http://www.thingiverse.com/thing:715496). Check remixed for Instructions. Other printed parts: [E3D v6 30x30 Fan Cover](http://www.thingiverse.com/thing:607114) You can get the others in the original version. Update: 4/12/2015 Added new 50x15mm Side Blower Fan Duct and also a 40mm Fan Duct requested by BerniApple.
Topics: thingiverse, prusa_i3_rework, wade, E3D, 3D Printer Extruders, greg, E3D_v6, stl, rework,...
10
10.0
Mar 19, 2021
03/21
by
(Mindfab)
data
eye 10
favorite 0
comment 0
This is a derivative based on a Wade Nema 17 extruder. It uses a splined model-car insert as pinch wheel... The axis is M4 and the bearings are 624 for axis and 608 for the idler...
Topics: mendel, thingiverse, Other, wade, extruder, stl
4
4.0
Apr 1, 2021
04/21
by
(MiseryBot)
data
eye 4
favorite 0
comment 0
This is a retrofit stepper design for anyone wanting to get rid of the DC motor filament pusher. It uses the MK5 hot end. Edit: I ended up having to make an aluminum idler pulley. The printed ABS idler pulleys work for a while but eventually get a flat spot and stop working. The big benefit of this design is that you can cam it open and have full inspection or cleaning ability in seconds. Oh, and it uses a stepper which allows you to use the Skeinforge 35 reversal module, which will allow your...
Topics: filament, Jstkatz, wade's, MK5, openscad, stripped, extruder, stepper, strip, stl, spring, lever,...
5
5.0
Jun 7, 2021
06/21
by
(Nazdravi)
data
eye 5
favorite 0
comment 0
Allows to change Wade extruder (and eventually other extruders) by loosening just one screw. This thing is inspired by tbusers horizontal mount ( http://www.thingiverse.com/thing:3840 )
Topics: extruder, mount, mendel, openscad, 3D, reprap, Other, wade extruder, thingiverse, stl, parametric
4
4.0
Apr 12, 2021
04/21
by
(Nutz95)
data
eye 4
favorite 0
comment 0
**Updates** ***April 4th 2015***: Remove the hole for Hex nut because the nut was breaking the part when it twisted **Summary:** The great part with this extruder is that the filament is properly guided to the hobbed bolt. I was fed up with standard Greg's extruder where i nearly needed to remove the pressure screws every time i wanted to change my filament. With this system that question is obsolete as the filament is always properly guided from the dedicated top hole, to the bottom hole. The...
Topics: thingiverse, wade, 3D Printing, Geared_Extruder, Wades_extruder, stl, strong, Gregs_Wade_Extruder,...
4
4.0
Mar 20, 2021
03/21
by
(Nutz95)
data
eye 4
favorite 0
comment 0
Extruder based on http://www.thingiverse.com/thing:456025 I have added the hole for J-Head and some screw holes to keep JHeads fixed. This part is for 3mm filaments You will need to generate support to print this part. I liked this part because it's strong between the 2 ball bearings. I have already broken 2 extruders exactly on this specific spot and this design was the one i was looking for except that i needed the hole for the hot end.
Topics: strong, Gregs_Wade, thingiverse, Gregs_Wade_Extruder, Geared_Extruder, 3D Printing, extruder, stl
10
10.0
Jun 6, 2021
06/21
by
(PSUReprap)
data
eye 10
favorite 0
comment 0
This extruder is modified to return to the original handedness of Wade's extruder(http://www.thingiverse.com/thing:1794), while retaining the new designs of Greg's Accessible Hinged Extruder(http://www.thingiverse.com/thing:8252). The holes match the original wade's design as well, so that this is a drop in replacement for Wade's Extruder when using a steel hot tip from TechZone. If only thingiverse allowed dual ancestry, we would credit all of the things listed here. The gears started off as...
Topics: extruder, techzone, mendel, reprap, greg, Other, thingiverse, wade, stl
10
10.0
Apr 5, 2021
04/21
by
(Seshan)
data
eye 10
favorite 0
comment 0
You will need 2 M4 50mm hex bolts, I found mine at lowes. Just print off the two parts, and thread the bottom part onto the bolt, it will be a snug fit. Currently the bottom and top are just friction fit together, you may want to add some glue.
Topics: thingiverse, 3D Printer Accessories, wade_extruder, filament_loader, stl, Robo_3D, Robo3D, gregs,...
5
5.0
Mar 20, 2021
03/21
by
(Thirkell)
data
eye 5
favorite 0
comment 0
Replace the M4 machine crew on your greg wade extruder for tensioning the filament with a M4 bolt and this simple knob and never use a screw driver again! Gone are the days of fumbling for a screw driver every time you change filament! Innovation through laziness! (I have yet to go and buy M4 bolts so i have nuts screwed up until right under the head for now as seen in the picture) Version 2 which is slightly more comfortable to use: http://www.thingiverse.com/thing:889485
Topics: x-carriage, stl, Gregs_Wade_Extruder, 3D Printing, i3, extruder, bolt, simple, prusa, accessories,...
4
4.0
Mar 21, 2021
03/21
by
(Thirkell)
data
eye 4
favorite 0
comment 0
Tensioner knob for M3 Screws/bolts. Intended for use with belt tensioners, extruder tensioners or generally anywhere you would rather use your hand than a screwdriver. Ensure that you print it the correct way up, there is a 1 layer thick solid section to support the hole. It is otherwise symmetrical. Insert a M3 nut in one side, if you do not have hex head screws, and tighten all the way to the end. Version 1 can be found here: http://www.thingiverse.com/thing:561529
Topics: stl, timing_belt, Reprap, mendel, screw, 3D Printing, extruder, gregs_wade, prusa, thingiverse,...
7
7.0
Mar 20, 2021
03/21
by
(Thirkell)
data
eye 7
favorite 0
comment 0
A mount, fan and z probe to attach to your greg wade extruder. Long z probe to go with the longer all metal hot end, scad file availibe for editing. Thanks to http://www.thingiverse.com/thing:167430 for the original z probe and to http://www.thingiverse.com/thing:244796 for the fan.
Topics: stl, Gregs_Wade_Extruder, fan, 3D Printing, auto_bed_leveling, i3, extruder, probe, cooling, prusa,...
9
9.0
Apr 7, 2021
04/21
by
(Yvan)
data
eye 9
favorite 0
comment 0
This is an improved variation of philsson's 40 mm fan duct. http://www.thingiverse.com/thing:184055 There is now a bit more height at the two screw mounting slots. I improved the air flow in the duct again, by creating a transition between the main plenum and the ring duct. There should be even more air flowing to cool the extruded material now. I've also directed the flow of air around the nozzle a bit better. I had printed a few big herringbone gears for a Wade style extruder and they came...
Topics: J-Head, 3D Printer Parts, PLA, extruder, wades, stl, duct, 40, j_head, thingiverse, fan, cooling,...
11
11
Apr 7, 2021
04/21
by
(Yvan)
data
eye 11
favorite 0
comment 0
Big high resolution herringbone gear with true 12.8 mm hexagon bolt head socket. I've also added a second version with a 13 mm socket, just in case someone needs that little bit of clearance. Some people have been pointing out that the previous version http://www.thingiverse.com/thing:97377/#files has a hexagon bolt head socket hole that is 14 mm wide. Somehow that ended up fitting my M8 bolts just fine, even though my bolt heads are the standard 12.8 mm wide.
Topics: wade, M8, reloaded, extruder, 12_8, 13, gear, thingiverse, big, high, 3D Printer Extruders, bolt,...
11
11
Mar 19, 2021
03/21
by
(Yvan)
data
eye 11
favorite 0
comment 0
Updated version is here: http://www.thingiverse.com/thing:201638 This is a(now outdated) quick variation of philsson's 40 mm fan duct. http://www.thingiverse.com/thing:184055 I've added a 9 mm by 16 mm opening to help provide cooling air flow to the PEEK body of the J-Head. The theory is that it would reduce the chances of PLA jamming. It may also be beneficial for use with ABS, but I'm not using it with that kind of plastic at the moment.
Topics: PLA, fan, shroud, j_head, stl, thingiverse, cooling, duct, wades, J-Head, 40, 3D Printing,...
11
11
Apr 7, 2021
04/21
by
(Yvan)
data
eye 11
favorite 0
comment 0
This is still just a quick variation of philsson's 40 mm fan duct. http://www.thingiverse.com/thing:184055 This time I increased the size of the duct a bit, so there should now be a little bit more air flowing to the extruded material. I've also tried to control the flow of air around the nozzle a bit better. I had printed a few big herringbone gears for a Wade style extruder and they came out distorted. Turns out that most of the air flow that is directed at the extruded plastic was coming...
Topics: J-Head, 3D Printer Parts, PLA, extruder, wades, stl, duct, 40, j_head, thingiverse, fan, cooling,...
11
11
Apr 5, 2021
04/21
by
(admica)
data
eye 11
favorite 0
comment 0
**Print is 1mm too tall. I'll fix it later.** **Update: Scad & stl files for both 3mm and 1.75mm filaments!** I switched from a jhead to a stainless steel Prusa hotend, however the new hotend mounts to an aluminum plate that has a slight depression where the hotend doesn't quite screw in all the way. I've taken the recess part from the Greg's Wade Reloaded extruder scad and added a little extruding ring to the recess plug to allow my plate to automatically center on the extruder. The result...
Topics: thingiverse, plug, recess, wade, 3D Printer Parts, alignment, stl, filament, automatic, gregs,...
9
9.0
Apr 2, 2021
04/21
by
(alagi)
data
eye 9
favorite 0
comment 0
This is a slight modification to jonaskuehling's extruder, such that a GRRF hotend can be mounted on it. Tested with an actual GRRF hotend.
Topics: thingiverse, 3D Printer Extruders, grrf, wade, extruder, stl
5
5.0
Jun 7, 2021
06/21
by
(araspitfire)
data
eye 5
favorite 0
comment 0
This is a derivative of Rhys' Drive Gear Holder. I have beefed it up slightly, made stronger support at the top for the Pinch-bolts. Most importantly I have made it easier to load filament without taking the idler assy. off.
Topics: extruder, upgrade, mendel, reprap, Gear, Other, thingiverse, wade, stl, Herringbone, tool
5
5.0
Mar 19, 2021
03/21
by
(beak90)
data
eye 5
favorite 0
comment 0
Design is currently untested! I decided to release it early. This is a simplified version of thing #4824. I took out the stem of it so the stepper hangs off the other side of the extruder. This means you only need one extra 606 bearing. It also means a lot less wasted plastic. Also, instead of a NEMA 17 mount, I changed the mounting pattern to be for the Kysan gearmotor so that you can use this upgrade on a MK3, MK4, MK5, or Brutstruder. I will be using this with a Brutstruder so that's the...
Topics: Gear, 606, makerbot, mk5, thingiverse, Makerbot upgrade part, wade, bearing, Other, stepper,...
14
14
Jun 7, 2021
06/21
by
(bot719)
data
eye 14
favorite 0
comment 0
Although it has been updated I liked this original design. As stated in its documentation you need to adapt it for your own use. I needed it for a MakerBot with an MK4 hotend. I know there a few adapter plates out there but I decided to go for an integral design. I had been using a Brutstruder http://www.thingiverse.com/thing:4036 which in turn uses Zaggo's Printable Extruder Holder http://www.thingiverse.com/thing:1912 and having good luck so I decided to go along these lines in adapting this....
Topics: extruder, greg, thingiverse, wade, stl, 3D Printer Extruders
12,456
12K
Jan 27, 2017
01/17
by
(c) 2017 Deep House Cat Show
audio
eye 12,456
favorite 0
comment 0
Deep House Cat Show - We Remember Mix - feat. DurtysoxXx ************************************************************************ 01. German Brigante - Samoa (Original Mix) 02. Kevin Over - Ly 03. Brett Gould - House Music Is (Original Mix) 04. Dennis Cruz - Shake it 05. Wade - They know (Original Mix) 06. Miguel Bastida - Moudness (Reedit 2016) 07. Sidney Charles - Lucky 08. Rafa FL - Want it 09. Poorly feat. Marshall Jefferson - Neanderthal (Original Mix) 10. Leftwing, Kody - Labyrinth 11....
Topics: German Brigante, Kevin Over, Brett Gould, Dennis Cruz, Wade, Miguel Bastida, Sidney Charles, Rafa...
9,779
9.8K
Aug 16, 2018
08/18
by
(c) 2018 Deep House Cat Show
audio
eye 9,779
favorite 0
comment 0
Deep House Cat Show - Episode 88.0 (Re-Mastered) - with philE ******************************************************************************** 01. The Last Days Of Jesus, Captain Audio, Brandon Hull - Intro Mashup 02. Paskal - Need Love (Henry L, Ingo Sanger's Disco Dub Mix) - Farside Records 03. Remote - Bookham (Original Mix) - Cr2 Records 04. Rick Wade - Creeper (Erich Bogatzky, Volt.Mar Remix) - minimood 05. Michael McLardy - Goodbye To The Circus - Baker Street Recordings PROMO 06. San...
Topics: Remote, Rick Wade, Michael McLardy, San Soda, Chris B, Nathan G, Captain Audio, Brandon Hull, Dave...
11
11
Apr 7, 2021
04/21
by
(donhuevo)
data
eye 11
favorite 0
comment 0
As I was opening and closing my extruder more often than I cared to because of filament stripping, chasing washers and springs all over the place, I got inspired to create a quick and easy alternative to the two tensioning screws.
Topics: 3D Printer Extruders, Gregs_Wade, extruder, stl, robo3d, thingiverse
8
8.0
Apr 1, 2021
04/21
by
(droftarts)
data
eye 8
favorite 0
comment 0
Yet another extruder design, but this one is designed to be built with simple tools for tightfisted repstrappers like me, who want to build it themselves, not just buy it. It's about the journey... You know how it is; you're building your RepStrap and there's very few ways of building the extruder; you have to buy parts that you can't re-use when you print a Mendel, or use a compromised design in the knowledge a new extruder is about the first thing you're going to have to print before your...
Topics: repstrap, sliced, thingiverse, plywood, mdf, Laser Cut Mendel, wood, extruder, wade, Other, reprap,...
5
5.0
Apr 1, 2021
04/21
by
(elk)
data
eye 5
favorite 0
comment 0
I had some difficulties to get the wade screw ready properly. I tried the tap-method but was not successful so I decided to try the teeth version. This "thing" will show a method to get a desired amount of teeth into the bolt and how to divide the surface of this screw into exactly same sized teeth. You will find all about the wade extruder here: http://reprap.org/wiki/Wade's_Geared_Extruder ...and here on Thingiverse: http://www.thingiverse.com/thing:1794 Can actually also be used on...
Topics: Hobbing, thingiverse, upgrade, reprap, improvement, useful, drive screw, mendel, extruder,...
11
11
Apr 5, 2021
04/21
by
(flow)
data
eye 11
favorite 0
comment 0
This is a remix to cool the hot end and the object at the same time much more easier. Now even with a naked mount.
Topics: thingiverse, Gregs_Wade_Extruder, 3D Printer Accessories, Prusa_i3, Fan_mount, stl, Short_version
5
5.0
Apr 8, 2021
04/21
by
(garzon3)
data
eye 5
favorite 0
comment 0
This is my simple model for the fan holder/housing for a Wade filament extruder for 3D printers. With this housing you can get better 3D printings and avoid the supporting material because material bridges become strong.
Topics: fan_mount, 3D Printer Extruders, extrusion_cooling_fan, fan_Holder, stl, fan_duct, thingiverse,...
