Well, We finally made it! The best 'Takoyaki' in town. 👍🏼 #ทำเองกินเองอร่อยเอง #shakariki432 🎌🎉 Source: https://instagram.com/p/BA9-bHOr3kk/ Uploader: ' KAIMOOK💃
Topics: Instagram, video
10
10.0
Mar 21, 2021
03/21
by
(3DMK)
data
eye 10
favorite 0
comment 0
**Mountable storage bins for Euro-norm size hangers** Storage bins that can be latched to Euro-norm size hangers
Topics: bin, euro-norm, stl, mount, Organization, thingiverse, Mountable, storage
11
11
Jun 6, 2021
06/21
by
(Boopidoo)
data
eye 11
favorite 0
comment 0
This mount enables the camera to be angled and rotated. The suction cup enables the mount to be placed on a smooth and flat surfade. The mount is a modified phone mount with a camera enclosure that slides in place and locks just like the original phone mount. The arm of the original mount was too short so I designed an extra arm that is attached using a M5 screw, knob nut and spacer. Extra arms can be used if needed. This is the phone mount I modified:...
Topics: 3D Printers, stl, thingiverse
10
10.0
Apr 22, 2021
04/21
by
(DWONH)
data
eye 10
favorite 0
comment 0
I have used single fan duct to cooling printing material for more than a year. It shows decent quality in general, but definitely has limit on specific models, which I found cannot be improved with changing design of single fan duct. This design uses two 40mm fan on both sides. It can be printed in one piece without support, only tricky point is upper arch of the outlet which I thought might have trouble if you don’t have cooling fan. I tried to make air blow point just below nozzle area, not...
Topics: 40mm_fan_duct, all_in_one, E3D_v6, fan_duct, stl, cooling_fan, integrated, thingiverse, 3D Printer...
10
10.0
Jun 11, 2021
06/21
by
(David_Mussaffi)
data
eye 10
favorite 0
comment 0
Summary Torus Knothttps://youtu.be/RBMiiFmzFp8https://youtu.be/2W0skkG46RE
Topics: thingiverse, stl
10
10.0
Apr 22, 2021
04/21
by
(Hootsumdaddy)
data
eye 10
favorite 0
comment 0
Holds finely ground bud for refilling vaporizers on the go. 1.8g with room. Inner may want to be lightly sanded to make a smoother slide. A bent paperclip is used to make a handle for the cap. It is heated and pressed into place.
Topics: vape, vaporizer, herb, MFLB, stl, Magic_Flight, weed, Other, thingiverse, storage
10
10.0
Apr 22, 2021
04/21
by
(MaxP0wer)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:1250852 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1250852
Topics: stl, customized, Sculptures, thingiverse
10
10.0
Jun 11, 2021
06/21
by
(Must_Energie)
data
eye 10
favorite 0
comment 0
Summary Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Sign_HEIGHT = 6 USB_Extra = 1 Sign_TYPE = 1 Device_Order = -1 Pencil_gap = 3 Connector_Type = 0 Sign_FONT = Letters SD_gap = 3 Sign_TEXT = Must Energie build_plate_manual_y = 100 build_plate_manual_x = 100 USB_sticks = 5 MicroSD_gap = 3 SD_cards = 3 Device_Type = 3 build_plate_selector = 0 USB_gap =...
Topics: thingiverse, customized, stl
11
11
Jun 6, 2021
06/21
by
(NewSUGARshop)
data
eye 11
favorite 0
comment 0
Размер: 30 х 8 мм Ориентировочный вес: 6 г PS: Если Вы хотите сахар в виде своего логотипа, вот наш сайт >> http://цветной-фигурный-сахар.рф
Topics: stl, Signs & Logos, thingiverse
11
11
Apr 22, 2021
04/21
by
(Plokplok)
data
eye 11
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:368375 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=368375
Topics: stl, customized, Mobile Phone, thingiverse
11
11
Mar 21, 2021
03/21
by
(Terminus)
data
eye 11
favorite 0
comment 0
This stand holds a quart bag open while you fill it. Fold the top of the bag over about an inch to hold the bag on there. This thing works pretty well, and it's a real convenience when you need to bag a lot of meal sized portions, particularly liquids like soup. I use it here on a large pot of chicken cacciatore. Another photo shows it holding a quart of plain water. These standard size (Walmart) quart bags actually hold about 5 cups. The stand is kinda thick and bulky, but it is stable and...
Topics: plastic_bag, bag, quart, holder, stl, Kitchen & Dining, stand, filler, thingiverse
9
9.0
Apr 22, 2021
04/21
by
(Tioh)
data
eye 9
favorite 0
comment 0
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. The model is scaled for costume size - based on my measurements. I have a small head - you might have to scale it up if you want to use it for a costume. This model was not made for animatronic eyelids. I did not make a model for the back of the head, ears and nose. There are two versions of this head: fursuithead29 2 has smaller eyebrows, a relocated jaw hinge - the holes...
Topics: Costume, fursuit, mask, raccoon, head, stl, animal, fursuit-head, thingiverse
10
10.0
Apr 22, 2021
04/21
by
(austingeorge)
data
eye 10
favorite 0
comment 0
Better pictures still to be provided. I have printed this at 0.3mm PETG with supports (easily removed due to opening underneath mount and fits snugly with 20x20 extrusion and M5 nut. Two cable tie mount points are on either side of the mount, assuming wires would run perpendicular to cable tie opening.
Topics: 2020_extrusion, wire_holder, cable_management, cable_tie, 3D Printer Parts, stl, extrusion,...
10
10.0
Jun 12, 2021
06/21
by
(bob132)
data
eye 10
favorite 0
comment 0
Summary Customized version of http://www.thingiverse.com/thing:50908 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=50908 Instructions Using the following options: teeth = 10 height = 5.5 type = Spur scale = 100 hole = Yes holeSize = 2
Topics: thingiverse, customized, stl
10
10.0
Mar 21, 2021
03/21
by
(brammezz)
data
eye 10
favorite 0
comment 0
Found this design, but din't find an stl. So i made one! Have fun and enjoy! Don't forget to rescale it!
Topics: thingiverse, Art, stl
11
11
Mar 21, 2021
03/21
by
(builditall)
data
eye 11
favorite 0
comment 0
In a world where chapstick is constantly under attack one vehicle stands alone, the Chapstick Launcher. This is the ultimate form of chapstick weaponry, with capabilities to hold up to two tubes and be reloaded as many times as you want. With the barrage of firepower this can release no chapped lips will stand a chance, and for your convenience it prints in easy to assemble parts. Warning making this will increase your coolness by 3000% and allow you to not loose chapstick as easily as before,...
Topics: stl, household, office, thingiverse, holder, chapstick, car, CNC_Machine, garden, toy, openscad,...
10
10.0
Mar 21, 2021
03/21
by
(designthatmatters)
data
eye 10
favorite 0
comment 0
IKEA ORDNING flatware caddies are the perfect bucket. They're cheap (three bucks!), light and strong (stainless steel)! We use them in the studio to hold screwdrivers, various poking and scraping tools, sharpies and whiteboard markers. We discovered that the hole pattern is relatively consistent, and so designed a clip that snaps into the caddy and lets you mount the caddy on a pole. The caddy clip is the perfect accessory for our z-rack whiteboard. Instructions for make and use of Z-Rack and...
Topics: stl, ORDNING, organization, Office, organizer, IKEA, Whiteboard, makerspace, office, thingiverse,...
10
10.0
Apr 22, 2021
04/21
by
(designthatmatters)
data
eye 10
favorite 0
comment 0
Marker holder 3D printed accessory for a Z-rack Whiteboard. Snaps onto side pole and holds 4 markers. Instructions for make and use of Z-Rack and accessories here: https://youtu.be/6beuL2oSogE
Topics: Office, organizer, office, whiteboard, stl, thingiverse, makerspace
9
9.0
Apr 22, 2021
04/21
by
(designthatmatters)
data
eye 9
favorite 0
comment 0
S hook 3D printed accessory for a Z-rack Whiteboard in both small and large. Snaps onto the top pole and holds easel pads and posters. Instructions for make and use of Z-Rack and accessories here: https://youtu.be/6beuL2oSogE
Topics: Office, organizer, office, whiteboard, stl, poster, thingiverse, organization, makerspace
9
9.0
Jun 11, 2021
06/21
by
(dude9001)
data
eye 9
favorite 0
comment 0
Summary This clamp is used to hold up this cable chainhttp://www.thingiverse.com/thing:666118 New! Ver 3 easy to print more clean looking
Topics: thingiverse, stl
10
10.0
Apr 22, 2021
04/21
by
(jakemilgrim)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:499177 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=499177
Topics: stl, customized, Organization, thingiverse
10
10.0
Apr 22, 2021
04/21
by
(jakemilgrim)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:499177 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=499177
Topics: stl, customized, Organization, thingiverse
10
10.0
Apr 22, 2021
04/21
by
(massimo61)
data
eye 10
favorite 0
comment 0
Butterfly very Big 3D Puzzle customized this source: "http://www.thingiverse.com/thing:178830"
Topics: butterfly, stl, Construction Toys, thingiverse
10
10.0
Mar 21, 2021
03/21
by
(mikhart)
data
eye 10
favorite 0
comment 0
V2
Topics: skerton, Kitchen & Dining, stl, mill, Coffee, hario, Hario_mini, thingiverse
4
4.0
Apr 13, 2021
04/21
by
(sablebadger)
data
eye 4
favorite 0
comment 0
This thing was made with Tinkercad. A simple caddy for tokens to keep everything organized.
Topics: thingiverse, stl, Games
10
10.0
Mar 21, 2021
03/21
by
(safiq10)
data
eye 10
favorite 0
comment 0
Test
Topics: Robotics, thingiverse, stl
6
6.0
Dec 29, 2019
12/19
by
2 Data Guys
audio
eye 6
favorite 0
comment 0
Our huge - 41 minutes, 2DataGuys Podcast is out, split into three easy listening parts! James and Marc try to tackle Australia's recently introduced Metadata laws and break it down. As always, we begin with a light wine story - followed by a mashup of news containing various views around the metadata laws, followed by in-depth discussion around what is metadata, when did the law get introduced, what is the fact from fiction and tailing off with our opinions on this subject. Sit back, relax,...
5
5.0
Apr 22, 2019
04/19
by
2.5次元—玩具总动员
audio
eye 5
favorite 0
comment 0
万代续篇来了，从90年代至今的壮大历程，包含转型和合并。欢迎大家订阅本节目，本节目QQ群号：416145732。本人微博微信博客：toratorado
7
7.0
Mar 22, 2020
03/20
by
201404241557254891
audio
eye 7
favorite 0
comment 0
《仙剑奇侠传》是我玩的第一个电脑游戏，因为我平时不太爱玩游戏，所以，几乎也可以说是我唯一玩的游戏了。在游戏成功以后，有好多不同版本的小说出现，都是把游戏改编成的文字。其中有些版本不值一读，简直就是个攻略，但是有一个版本的小说却了不得，写得非常好。因为我直到现在仍然喜欢这个游戏，再加上这个版本的小说又写得好，所以我忍不住要读一读这个..
6
6.0
May 30, 2019
05/19
by
2016年
audio
eye 6
favorite 0
comment 0
・プレミア12 ・最近の芸能界 （一部マイクのアレで音声がアレしています）
3-2-1 Culture! reviews the world premiere of the new musical Empire, headed to Broadway soon!
7
7.0
May 30, 2019
05/19
by
3090
audio
eye 7
favorite 0
comment 0
3090第39回目.mp3 当番組は30代前後の男2人が、90年代の話を中心に、横道にそれつつ、無駄な、ちょっとだけ面白い話をお届けする30分番組です。 オープニングトークは「最近気付いた癖」について。珍しくTJから振られた話題にGOが……。 また、「3090」は当ブログだけでなく、iTunesでもお楽しみ頂けます。検索して、ぜひ番組登録してみて下さいね。
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
11
11
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 11
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:47935 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=47935
Topics: stl, customized, Accessories, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Mar 21, 2021
03/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: thingiverse, stl, customized, Bracelets
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
9
9.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 9
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
10
10.0
Mar 21, 2021
03/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: name bracelet, stl, customized, Bracelets, thingiverse
10
10.0
Apr 22, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 10
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:56257 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56257
Topics: stl, customized, Bracelets, thingiverse
54
54
Aug 1, 2021
08/21
by
3D BLAST
audio
eye 54
favorite 1
comment 0
Topics: electronic, filter house, anime, chillwave, electronica, future funk, hip hop, vaporwave, detroit
Source: https://3dblast.bandcamp.com/album/promise-girl
60
60
Aug 1, 2021
08/21
by
3D BLAST 爆風
audio
eye 60
favorite 0
comment 0
Topics: electronic, bedroom electronica, deep vaporwave, filter house, french house, future funk, hip hop,...
Source: https://dmtrec.bandcamp.com/album/promise-girl
46
46
Jul 25, 2021
07/21
by
3D BLAST 爆風
audio
eye 46
favorite 0
comment 0
Topics: electronic, alternative vaporwave, chillwave, future funk, outsider ambient, vaporwave, florida
Source: https://dmttapes.bandcamp.com/album/promise-girl-dmt-244
8
8.0
Apr 22, 2019
04/19
by
40 Below Project
audio
eye 8
favorite 0
comment 0
Nathan Waddell chats with editor Jason Lee Norman about balancing creative writing while working as a coal miner in Hinton.
