- If you made this thing and are happy with it I kindly ask to give it a shout!
================================================================== Although yet another mobile stand I think it is kind of special and may be of use for one or the other. Initially I made a crude proof of concept model. It´s sound was that impressive that my wife at once nagged me into making a useable one for her iPhone 6S. Not that she had to nag that much, I would have done that anyway...... Besides the speaker the stand is equipped with a conduit for the cable. Although the sleeve of some accessory cables may be slightly bigger in diameter, they too, will fit well after trimming a little with a hobby-knife. The original one fits pefectly well, even with some give to fix it with some melting-glue if wanted.... The side benefit will be, that after giving this stand to your wife, the WAF* for your printer will go through the roof :-)
I am pretty sure there will come some more models for different mobile types, but for the moment I made good experience by scaling the actual one in the slicer for my Galaxy S6. The cut-out for the mobile is 8x68mm. For different mobiles you just have to scale the X and Y axis. Scale the Z axis the same as X to keep the circles round.
* WAF = Wife Acceptance Factor For the iPhone7 one might check on http://www.thingiverse.com/thing:1845365